adding butyl damping sheets to floorboards made a massive difference to cabin heat
By Rafaqat Ali • 22 Oct 2026 • in Maintenance & DIY • 36 views
Owning a 1000cc local hatchback in Lahore during peak summer means fighting heat from every angle. Last month I noticed the center exhaust tunnel and front floorboards were radiating so much heat that the floor carpet was hot to the touch, and my shoes felt like they were in an oven after forty minutes of driving. The factory AC simply could not keep up with that level of thermal soak from below. I decided to strip out the front seats, rear bench, and floor carpet over a weekend. After vacuuming and wiping the sheet metal with isopropyl alcohol, I covered the front footwells and exhaust tunnel with 2mm foil-backed butyl sound deadening sheets, followed by a layer of closed-cell thermal foam. The raw material cost roughly 10,000 to 14,000 PKR depending on sheet thickness. The difference in cabin comfort was night and day. The floor stays cool to the touch, road tyre hum dropped noticeably, and the AC blower actually cycles off maximum speed now. Did anyone here bother removing the headliner to insulate the roof sheet metal, and was the temperature drop worth dropping the sun visors and pillars?
