how putting back my thermostat valve fixed my terrible fuel mileage
By Rafaqat Ali • 5 Sept 2026 • in Fuel & Efficiency • 13 views
I wanted to share a quick lesson I learned recently about fuel economy. I bought a used 1.3L sedan a few months ago in Peshawar. The fuel average was terrible—around 8 km/l in the city. The previous owner had bypassed the radiator fan to run directly on ignition and had completely removed the thermostat valve, a very common practice among local Ustaads to 'prevent overheating'.
After doing some research, I realized the engine was running too cold, never reaching its optimum operating temperature. This caused the ECU to constantly run a rich fuel mixture.
I went to a professional workshop, got a new OEM thermostat valve installed for PKR 3,500, flushed the system, added proper coolant, and made the radiator fan automatic again. My city mileage instantly jumped to 13.5 km/l, and the engine feels much smoother.
Has anyone else faced this bad advice from local mechanics regarding removing thermostat valves?
